Portable folding dice tray - print in place - for D&D or other RPG

Print in place foldable dice tray for any RPG that uses dice.

When printing, make sure your printer's dimensions are correct, so the hinges print nicely. When done, flex the hinges gently back and forth, until they move freely.

The steps on the side are a bit oversized. If it closes too tight, file or cut a tiny bit from the step (shown on one photo with an arrow). That will leave more space for the clamp. Adjust it so that it closes easily, but stays closed firmly.

You should cut and glue felt to the inside. An A4 sized one is enough for two trays. I've used double sided tape and glue. Both worked fine.

I've added text to the edge on mines with a 0.5mm emboss. I.e. Prusa slicer can do that for you.