June 9, 2023
Description
A very nice DIY Project for everybody. You have a very little to soldering, the electrical part but that you get easily i believe in you that you can do that. If you are very young age maybe you can ask your father for advice. ;)
This Lamp is not the one what is filigran
What you need:
6cm big Solarplate in square
a solarlight platine what you can buy in your loved onlineshop of your choise
1 or better two batteriecases what you solder in parallelconnection speak + on+ and - on - (You can google that fast to get a eye on a image to understand it visualy so i don't have to explain here to much) ((if you are not sure you can just use 1 to keep it simple))
and AA Batteries for it to run
a Ultra High lightening LED ~ 2Volt Or if you have just a normal you can use that, it' up to you, just try to stay by the 2 Volt (you can read up the desciption from the platine for more details)
You also will propably need a little bit cable, and propably a bit silikone or hot glue to hold the solarplate on it's place and to prevent the watter from coming in and to the cable.
also if you don't print the two bars you will need a piece of wood what fits like in the picture, all three lamps are on wood mounted.
What Tools you will need?
soldering iron
Hot Glue pistol or what glue you choose, like silicone it should be flexible
The platine is very simple and easy to understand you will get that. Just solder the solar, batterie, and led, rdy. Solar you solder on S, batterie on B and the LED on L
Also if you buy a different one, it works always the same
Through the Solarplate the platine know when the sun shine when it get electric, is the electricy away in the night the LED starts to shine. Very Very simple.
If you use the LED in the link below you will have to drill maybe a little bit the hole bigger since it was designed for a simple 2 pin 5mm Led
You still can use a simple 5mm LED, you don't have to use the ultra bright from the link below. But with the ultra bright you get definitive more lumen
Where you can get the needed parts?
I can share with you where i buy mine, it was all on amazon here the links:
Batteriecase: https://www.amazon.de/dp/B00EOKW6LI?psc=1&ref=ppx_yo2ov_dt_b_product_details
Platine: https://www.amazon.de/dp/B09GJJQKF6?psc=1&ref=ppx_yo2ov_dt_b_product_details
Solarplate: https://www.amazon.de/gp/product/B073Y3KFKV/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/9wwKT2k2c1d
Enjoy create some
Slice Settings : Standard / Hollowed Objects
Hollow : You can make the Lamp Parts hollow or with some infill when you slice it, decide for yourself accordingly to your needs
Printing Settings : Standard
Resin : no special needed for the Lamp parts, for the stick maybe ABS like or just the standard resin. But still i would recommend a pice of wood for the Stick/Pillar
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
BM-design
