Better Shoulder Buttons for Miyoo Mini Plus

Replacement shoulder buttons to make the Miyoo Mini Plus more comfortable.

Recommended to print on a resin printer with tough resin, but this thing will also print well on FDM. I'd recommend a smaller layer height if you choose to do so, 0.20mm should work.

You will need to buy springs in order to get the full experience, but they are not required. The design uses MX-compatible springs like are used in mechanical keyboards. I recommend starting with 35g.

Exact thickness of the base is important, so you will either need to fully calibrate your printer, offset the Z of the print, or sand down the plunger in order to get proper contact. An easy way to see how close your print comes out is to use a caliper to measure the thickness of the base. It should be 1.55+/-0.1mm from the "D" shape to the bottom.