Lilygo T Display S3 AMOLED Case

Lilygo T Display S3 AMOLED Case

Rev 1 - 08Sep23 gcode file for the top added which has been generated using PrusaSlicer 2.6.0.
Some users have experienced issues with printing the switch tabs in Cura so this file may help.

---

Update 20Feb24

Added a new top file modified to suit the new S3 which now has a flat acrylic embedding of the display which is level with and all round the display. See file

AMOLED top Acrylic Version 20Feb24 v35.stl

---

Slimline case for the Lilygo T Display S3 AMOLED with header pins.

Screwless design that clips together firmly.
A spudger maybe required to spring one side to help the back to clip in.
It's a snug fit.
Likewise the spudger is needed to get it apart.

I've included a few variants of the case to suit most needs

Top with USB C and Reset holes

Top with USB C. Reset and Stemma QT connector holes

Bottom with gpio pin header slots

Bottom with no slots

All printed in PLA with no supports required.

I've included STEP files as well as STL to make it easier to modify if required.

Hope this helps someone.