Leather clamp for leatheworks

Hi all!
This is a leather clip project I made for a friend of mine. He recently became interested in leather production. The clip allows you to simplify the work with wallets, business card holders and other small items.
I am happy to share the model with everyone.
You will also need M6 threaded studs and M6 nuts. I fixed the nuts and handles with epoxy.

Update 07/29/2023
The original design lacked anti-slip elements for attaching to the table.
These elements are best printed from eTPU95. I used eSun filament.
It is better to fasten the gasket with superglue, and to install the round part on the stud, I used two M6 nuts, but did not clamp them, but left the part free to rotate.