BetaFPV Meteor 75 Pro Whoop Box - Carrying Case

I was looking for a carrying case for my BetaFPV Meteor 75 Pro FPV Quadcopter that holds my drone as well as accessories like batteries, charger, tools, props and a powerbank. Since this is very specific, I didn't find anything out there that met my requirements.

This box holds everything you need to have a full afternoon of non-stop flying!

I'm from Germany, so I got all the things from amazon.de, here is a list of what is in this box:

Note: You really only need 6x3mm magnets for the lid. Everything else is of course of your choice. I included all the design files in case you need to change any measurements for bigger or smaller drones or different power banks / chargers.

ø6x3mm Round Magnets: https://www.amazon.de/dp/B0B5RGXYQM?psc=1&ref=ppx_yo2ov_dt_b_product_details

Baseus Power Bank 10000 mAh (good for 3-4 full charges of 6x 550mAh Lipos: https://www.amazon.de/dp/B0B6SV33BH?psc=1&ref=ppx_yo2ov_dt_b_product_details

Short USB-C to C Cable: https://www.amazon.de/dp/B07H96FWY9?psc=1&ref=ppx_yo2ov_dt_b_product_details

BetaFPV 6 Port Charger: https://www.amazon.de/dp/B09BR387VC?psc=1&ref=ppx_yo2ov_dt_b_product_details

Prop-Lever: https://www.amazon.de/dp/B08CHMHMPB?psc=1&ref=ppx_yo2ov_dt_b_product_details

Drone: https://www.amazon.de/dp/B0BZVS49TJ?psc=1&ref=ppx_yo2ov_dt_b_product_details

550 mAh LiPo's: https://www.amazon.de/dp/B0BZPJX27C?psc=1&ref=ppx_yo2ov_dt_b_product_details

I used velcro to attach the small LiPo Voltage Checker (charger) that comes with the drone.

gcodes included are for the Prusa i3 MK3S in 0.3mm layer height (like in my photos)

Have fun and fly save! o/