OnStepX Enclosure for FYSETC E4

This is a case / enclosure for OnStepX using the popular Fysetc E4 board. It has provisions for four RJ45 jacks to connect the motors (RA, DEC, Focuser, Rotator). It has three holes for mounting 5.5mm barrel connector jacks for 12/24v input, as well as two switched outputs (dew heaters). It has a square mounting pattern to attach to common mounting brackets, such as those designed by Chad Gray. I'll eventually include my own.

Things you'll need:
Assortment of M3 cap screws
(4) RJ45 jacks, as narrow as you can find.
(4) 2.54 Dupont or XH2.54 pigtails
(3) 5.5 x 2.1 power jacks
Misc hookup wire
Fysetc E4 board

Please note:
The photos of the enclosure were from a previous revision. This revision is slightly taller to accommodate space for mounting bracket screws under the main board. It also has added ventilation.