Flashforge Dreamer tall spool rod holders (left & right) and long spool rods

This is my final version of tall spool holders and long spool rods. These work with HatchBox, Sainsmart, and 3D Solutech 2.2lb (1kg) spools (and possibly others) on both the left and right side. I made the holes for positioning nubs slightly larger to accomodate slight variance in position on new dreamers. Let me know of any problems.

I made my own version of a tall spool rod holder so that I could adapt it to fit the right side (moved forward to avoid the y-axis motor). I also made the rods longer with a long handle that keeps spools with large center holes secure. These are just about as tall and long as I could get without interfering with operation of the printer.

I added cylinders to help with large size diameter spool holes and also because the spools sometimes lean towards the build plate. The cylinders have one end bigger that goes towards the build plate to keep the spools from leaning that way. I use the small cylinder for HatchBox spools and the large cylinder for 3D Solutech spools.