October 18, 2023
Description
The little plastic piece on the end of my trunk divider broke off.
V2: Hole is purposely a little small. Use a 1/4" drill bit to open the hole up slightly and then press on.
V3 Update: I realized the other side of my trunk divider which I was basing my original design off of was also broken, and should have an extra circular piece that slots into the plastic trim in the trunk. The new design includes that piece in addition to some added material around the ends to strengthen up the part. There should also no longer be a need to drill out the piece once printed - just tap it on gently with a rubber mallet.
No glue required very tight fit.
License:
Creative Commons - Attribution - Share Alike
386
x20dragon
