Prime Bottle Replica

Update
2023-13-16
I uploaded a slightly different version of the lid. I made the wall slightly thicker so the threads don't cut into the grip lines quite as much. I am using a 0.6 nozzle so that might have more of an effect than if I was printing with a 0.4 nozzle.
Still have to test fit it when my grandson gets home from school.

2023-11-16
I added a standard (thick wall 2mm) version if you want something a little stronger. 2mm is probably a little too heavy but it does make it much stronger.
I think the lid is a little thin so I may have to redesign it a little.

Summary
Not sure why, but my grandson wanted me to print him a Prime Bottle. I only had a photo to work from and some measurements so I came up with my version of the Prime bottle.

It is designed to print in vase mode, so it is not watertight and is not particularly strong. The lid is printed normally and does screw on if you are careful. I didn't know what the threads on the Prime bottle are so I just made up my own. There are some slight variations in the design to allow it to print properly in vase mode but printing it that way gives a much nicer surface finish.