January 13, 2015
Description
This is a 3D printed Wimshurst machine suitable for printing on a 200x200x100 RepRap. Mechanically it works very well, but electrically it is a bit weak, putting out sparks no bigger that about 1/2 inch. I will likely get back to this project one day, but in the meantime I'd thought I'd release the files for others to play with.
Included are STLs and Autodesk 123D Design source files.
Note: The two large concentric circles are drive belts to be printed in TPE, see the link below for notes on other materials.
Full Details Here: http://steampunkworkshop.com/3d-printed-wimshurst-machine/ ?
License:
Creative Commons - Attribution - Non-Commercial
vonslatt
