Summary

A simple adaptor to allow the standard Falcon2 enclosure vent hose to exhaust through a organic fume filter, the type that usually twists on to a spray mask.

I modeled this to fit this Amazon item: One Pair 6003 Organic Vapor Replacement Cartridge Filter

V5 may be a bit tight, the V7 model has a bit more room so the filter sits in better. it will need taping to seal it to the adaptor.

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>HALOT ONE PRO</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.05</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>n/a</p></div></p>                                                    <strong>Filament:</strong> generic 405nm resin                whatever                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>I printed this with the filter part direct on to the build plate, then manually added some medium supports to the inside large flat plane.</p><p>I'd expect this to print OK on an FDM printer, the walls are 2mm. you may want to add supports unless your printer is fantastic at bridging.</p></div>

How I Designed This

unnecessary and boring info about the design

            <div><p>I decided to try and trace a photo in Fusion to get the profile for the vent adaptor. getting the image on to a canvas and scaled was simple enough. getting a spline to actually follow the outline wasn't so easy. </p><p>I used the dimensions from the in box fan adaptor to profile the hose connector, but to speed up my print I shortened it to just 20mm from the 40mm the original was. I have no regrets about this decision, it allowed me to print the model before I went to bed.</p><p>having drawn the profile sketches and extruded some bits I used Shell to remove the end faces and create the bulk of the model. probably pretty normal stuff but I'd not used Shell like that before, so I had a small moment of joy when it worked as I'd hoped.</p><p>After adding a few fillets to make it pretty I realised it needed some clearance to the filter didn't get pressed against the internal face and restrict the air flow, so a quick offset on the sketch and a small extrude and the model is now complete.</p></div>

Creality Falcon2 Vent Adaptor

Creality Falcon2 Vent Adaptor

Related Models