Kaffemacher 51mm Sieb, Dedica, Niche Zero, WDH Tool, Puck sieve

Holder for portafilter for a Delonghi Dedica 685 and 885.

This one can hold the "Kaffeemacher" Portafilter and is strong enough that you can tamp inside it.
Updated Version to my first try.
I have at least 3 versions. Choose what you want, and feel free to change.

This part is pretty specific for me.
Its for Delonghi Dedica 685 or 885, a Niche Zero Grinder, a 51m Tamper, and a 33mm slot for a WDH tool.

V1: No puck sieve option
V2: Puck sieve slot on side (might get messy inside, needs to be cleaned i guess)
V3.1: Puck sieve lot in the back (might be uncomfortable to use, I will test it)
V3.2 Puck 45° instead of 60°, 3,5mm wide instead of 2mm, edges for accessories raised by 4-5mm

Pictures show V3.1

Happy to get likes and comments. Let me know if you have ideas to improve this.

If you are super happy with what i provide for free, it would be super nice if you would leave me a tip. On the road to a working product I go through quite some material. It would just help me out a bit.
Falls dir meine Konstruktion hilft und du damit zufrieden bist, wäre ich sehr dankbar für ein kleines Trinkgeld.Beim Erstellen einer funktionierenden Konstruktionen geht auch einiges an Material drauf.

Printed:
Bambu Lab P1S
0,2mm
5 Wall Layers (not 2 Layers!)
20% infill
PLA (at least), better PETG