January 20, 2015
Description
simple and strong spindle holder. I wanted something to carry my two 1kg spools without stressing the x axis supports.
Total material used: ~25g of black 1.75mm for all parts at 20% infill
parts needed:
1 spool (about 17g of PLA at 20% infill)
2x Spindle-Mount
2x 8mm Joint
2x Spindle-cone2
12x 8mm or 5/16 Nut
2x 135mm (5.3") 8mm or 5/16 threaded rods
1x 245mm (10") 8mm or 5/16 threaded rod
4x 8mm or 1/4" washers (1/4 inch fits better than the 5/16 washers)
2 spools (about 25g of PLA at 20% infill)
2x Spindle-Mount
2x 8mm Joint
4x Spindle-cone2
14x 8mm or 5/16 Nut
2x 135mm (5.3") 8mm or 5/16 threaded rods
1x 245mm (10") 8mm or 5/16 threaded rod
4x 8mm or 1/4" washers (1/4 inch fits better than the 5/16 washers)
License:
Creative Commons - Attribution - Share Alike
chanyote66
