Summary

PARTS I USED

2x - V155 Micro Switch

1x - USB Joystick Encoder

2x-6x - Springs They need to be atleast 5mm in Outer-Diameter and atleast 20mm long.

1x - 80mm M10 Hex Bolt (Lever Joint)

4x - 20mm M3 Screws (Micro Switches)

2x - 35mm M5 Countersunk Screws (Springs)

1x - 60mm M5 Hex Bolt (Knob)

4x - 30mm M6 Cap Head Screws (Base)

1x - ~1m Wire (I just got an old USB cable and cut it to length.)

1x - ~ 30cm Heatshrink (Optional but makes it cleaner.)

Print Settings

Printer Brand:

Creality

                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>K1</p></div></p>                                                                                <p class="detail-setting rafts"><strong>Rafts: </strong>                     <div><p>Doesn't Matter</p></div></p>                                                                                <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>No</p></div></p>                                                                                <p class="detail-setting resolution"><strong>Resolution: </strong>                     <div><p>0.3</p></div></p>                                                                                <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>25%-70%</p></div></p>                                                    <strong>Filament:</strong> 3dprime PLA + HT                grey                    <br>                        <p class="detail-setting notes"><strong>Notes: </strong>                    </p><div><p>ZERO SUPPORT printing,</p><p>Knob 80% infill<br>Button Cap: 35% Infill<br>Body: 35% infill<br>Shifter Lever: 75% infill</p><p>Printed in PLA HT 3dprime</p></div>

Sim Racing Sequential Shifter

Sim Racing Sequential Shifter

Related Models