FPV Antenna Project: Universal Configurable FPV Drone O3/Vista/anything VTx mount

| [O3 Pod](https://www.printables.com/model/381833) | [O3 Frame](https://www.printables.com/model/555104-dji-o3-camera-frame-maximal-lens-protection-minima) | [Action2](https://www.printables.com/model/217897) | [Action4](https://www.printables.com/model/726658) | [AcePro](https://www.printables.com/model/726602) | [GoPro 11 Full/Mini](https://www.printables.com/model/324369-gopro-11-mini-drone-mount-any-drone-any-tilt-any-n) | [Antenna Mount](https://www.printables.com/model/451006-the-fpv-antenna-project-universal-configurable-fpv) | See [this project on Printables!](https://www.printables.com/model/451006-the-fpv-antenna-project) .. it's organized by manufacturer and has many more _make_ posts! Only pretty basic versions are uploaded here. Everything else is made *on-demand*! All frames, antennas, GPSs, Rx antennas, and O3 VTx bracket variations are made on-demand when you message me: - *Join my *[*3D Design discord*](https://3d.t413.com/go/discord?tv.ant)*! * - *All requests are optionally donation-supported, on-demand!* - *Response within 24h!* - *Please read the "steps" below first!* - Please, no dms. They're much harder to organize, reply-to and will take a few weeks. - Use my discord! ### Everything is always free! And after you've finished your build, sent photos and feedback, and are happy.. then I do take donations :) ### Step 1: *Choose Frame* - Quads I've made mounts for myself/others so far: *TBS Source One V5, ImpulseRC Apex, Apex DC, Apex EVO, EVO DC, Micro Apex, AOS 3.5, AOS 5, AOS Cine35, Diatone Roma F5 V2, F7, Banggood Steele 5, GepRC Mark4, Mark5, Martian IV, iFlight Nazgul XL5/Chimera7/etc, Quadmula Siren F5, F3, Flyfish Volador VD5, Supafly Flipmode, SpeedyBee Mario 5* - See the [Files tab](https://www.printables.com/model/451006-the-fpv-antenna-project/files) for a more up-to-date list, organized by manufacturer.. But it's always better to ask! - Most any frame is fair game!  ### Step 2: Choose Antenna - DJI O3 stock dual-feed antenna - DJI Vista V2 Antenna - Walksnail Antenna - Cherry Antenna - Dual antennas as well! ### Step 3: Choose your GPS *(or none!)* - Walksnail WS-M181 [w/compass] | M10 | [caddx](https://caddxfpv.com/products/walksnail-ws-m181gps) | $17 | 18x18x4.6 | 4.3g | 5 | - HGLRC M100 MINI | M10 | [hglrc](https://www.hglrc.com/products/hglrc-m100_mini-gps) | $16 | 15x15x5.2 | 2.6g | 5 | - Beitian BE220 M8N / BN-220 | M10 | [amazon](https://www.amazon.com/gp/product/B081YTBNLY/) | $15 | 22x20x6 | 5.3g | 4 | - GOKU GM10 *Mini* V3 | M10 | [flywoo](https://flywoo.net/products/goku-gm10-mini-v3-gps) | $18 | 18x18x4.6 | 4.5g | 4 | - BZGNSS BZ-181 | M10 | [nbd](https://newbeedrone.com/products/bzgnss-bz-181-dual-protocol-gps-positioning-module-suitable-fpv-out-of-control-rescue-fixed-wing-crossing-drones) | $20 | 18x18x8 | 4.6g | 4 | - GOKU GM10 *Nano* V3 | M10 | [flywoo](https://flywoo.net/products/goku-gm10-nano-v3-gps) | $19 | 12x16x4.5 | 2.2g | 3 | - GOKU GM10 Pro V3 [w/compass] | M10 | [flywoo](https://flywoo.net/products/goku-gm10-pro-v3-gps-w-compass) | $20 | 25x25x6 | 7.2g | 2 | - Matek M80-5883 | m8 | [matek](http://www.mateksys.com/?portfolio=m8q-5883) | EOL | 20x20x10 | 7g | 2 | - TBS M8.2 GPS | m8 | [tbs](https://www.team-blacksheep.com/products/prod:tbs_m82_gps) | $14 | 20x22x6 | 5.2g | 2 | - iFlight M8Q-5883 V2.0 | m8 | [iflight](https://shop.iflight-rc.com/iflight-m8q-5883-gps-module-v2-0-pro1208) | $40 | 20x20x8.5 | 10g | 1 | - Many more ### Step 4: Choose your receiver antenna mount - ELRS T-style dipole,  - single horizontal low-profile zip/twist-tie mount - dual low-profile, one vertical and one horizontal - TBS Crossfire Immortal T dipole - low-profile zip/twist-tie mount or - classic two-arm immorta-t mount ### Step 4: Request your configuration! - Join my [*discord*](https://3d.t413.com/go/discord?p.ant) to request your specific custom version! - Donations accepted *if you're happy with your results* and have the means!  - Also check out my other FPV designs on [my profile](https://www.printables.com/@t4obrien/models)! ### Step 5: Print settings - Best printed *as oriented in the STL*! - Print with TPU filament, slowly - Use tree support if your slicer supports it. Standard otherwise.  - Use 2 or 3 perimeter walls for most setups. - Infill: Up to you. I use 40%.  ### Sharing & License & Stuff The LAST thing I want to do is restrict anyone from sharing. But. PLEASE share links to this printables page, not the STLs. Here's why: 1. This is under active development. The STLs WILL CHANGE and get better. 2. The documentation is really important here, and I'm sure there's stuff I'll be adding as feedback comes in. 3. The community is important, I want people to reach out and join the discord not download some STLs and go it alone. 4. It's just a *super dick move* to repost designer's stuff. I've spent a long time making, testing, and documenting this and my only reward is that little stupid 'like' counter, download counter, and photos/stories from users. *DON'T DEPRIVE ME OF MY ONE SENSE OF SELF WORTH* The actual license is Creative Commons (4.0 International License) Attribution---Noncommercial---Share Alike. If you'd like to print this commercially then reach out to me with a direct-message on [discord](https://3d.t413.com/go/discord?tv.ant) and we can talk. Flying professionally *using*my designs is fine-- though please do consider donating to support my work!