Spiral Sphere Planter

This is a planter pot I designed for a little design sprint exercise. No Supports should be needed. Materials needed are as follows:

4 Inch Pot:
8X 3inch by .25inch Wood Dowel

6 Inch Pot:
8X 4.5inch by .375inch Wood Dowel

8 Inch Pot
8X 6 inch by .5 inch Wood Dowel

I used white PETG Filament and finished the wood rods by lightly burning the surface, then sanding, then putting a matte lacquer on. (See shou-sugi-ban)