Recreation of the Playskool Familiar Places McDonald's place set figures. These were modeled off vintage figures and have been enlarged by 400% making each around 240mm (9 1/2") tall.
The originals came in two colors one with a red hat and one with a blue. The pieces have been oriented in the best printing arrangement. You will need to add supports to the following places:
- Inside of the body
- Front of body overhangs
- Inside the head post slot
- Front of the face overhangs
- Bottom of the hat
All pieces you will need one copy of except the McDButton which you will need to print three copies of.
The insert pieces on the body and face should just fit in the recesses on the body with friction but I suggest putting just a dab of super glue in the recesses before inserting the pieces. The head and hat go together with a square post and square post hole. These have been made a loose fit on purpose so you can either glue them or leave them unglued to mix and match pieces.
More figures in this line are coming in the future.
_Thanks and happy printing!_
Retrosarge
