Eggmobile for Bambulab LED Lamp Kit

This lamp depicts my design for the Eggmobile, hoisting the Master Emerald away from a crystal base.

No pilot is in the driver's seat; you can put your own figure in the chair if it is small enough.

The materials used are found below.

Silver - Bambulab PLA Matte Grey
Black - Bambulab PLA Matte
Yellow - Bambulab PLA Matte
Green - Prusament PLA Green Opal
Blue - Prusament PLA Royal Blue Blend
Cyan/Teal - Bambulab PET-G Translucent Teal

The “Base” of the lamp is identical to the one provided by BambuLab in the original LED Lamp Kit: https://makerworld.com/en/models/13717#profileId-13429

The BambuLab LED Lamp Kit, or something of a similar size, is required to use this item as a lamp. Because of this, it prints pretty small (approximately 9-10cm tall).

As this model uses PLA, the lamp's light won't shine through much.
I only had 1 spool of PETG translucent, which works well for the Master Emerald. If you want to use PETG material type, reconfigure the profile material settings first if using the 3mf, and change the plate type to match the materials requirements.

TRANSLUCENT MATERIAL FOR THE TEAL PARTS ARE RECOMMENDED.
If you don't use translucent materials, you won't get as much light coming through the lamp. It's that simple.
I have made the infill density in the 3mf 10% to help more light shine through the model, but obviously, opaque materials will block any light regardless of that fact. If you insist on using opaque materials for the lamp, you should go with a lighter colour instead of a darker one to reduce light absorption.

If you want to sell prints, or obtain premium models, please obtain a Commercial License from my Patreon: https://www.patreon.com/thomastedwards