Chair Anti Scratch Leg Insert Plug Cap Floor Protector

Prevent scratches on your floor with this chair leg insert plug. Inner diameter of the chair leg should be about 13.5 mm and it is fairly standard on modern chairs. For different inner diameter (ID) values you can simply scale the model in your slicer by using the factor

F = ID/13.5 (mm),

in which ID is your chair leg inner diameter in millimeters.

If the printed part falls out of the chair leg, use a little RTV silicone to stick it in place.

Printing note: I managed to successfully print the model as it is, without any supports.

Model units: Millimeters (mm).

Infill: 50%

Please consider tipping/donating through the link below if you have use of my design. Any amount is greatly appreciated.
https://www.paypal.com/paypalme/marin1401