September 25, 2024
Description
This charging stand for multiboard will allow you to put your baofeng onto the wall and keep it charged at any time.
1. Use only with 15mm wall offset if you want to use it as charger, otherwise the cable won't fit between wall and holder, so you will not get power to it! (version with 8mm and no offset comming soon)
2. This stl is a tight fit! Use Z seam Alignment as "Sharpest Corner" for best performance.
3. If your printer has some issues please fix them before printing. Otherwise it could be difficult for you to fit everything correctly. If you are not afraid of wasting some of the filament please share your experience in the comments, maybe it could work on not so accurate printers ;)
License:
Creative Commons - Attribution - Share Alike
kszyho8
