Airtag Holder For Bike Rack

Overview

This is a Airtag holder I designed for my rear bike rack. I specifically have the Bontrager Deluxe MIK (this is the one in stock at my local Trek store) but this should work for anything where the poles are about .45" (11.43mm) in diameter and about 3.3" (83.82mm) apart.

Materials

• 6x M3x12mm button head screws
• 6x M3 nuts
• This screw assortment¹ contains everything you need

Print Recommendations

Since this part may be exposed to heat from the sun and water, I would recommend staying away from PLA, regardless of what you use this is a pretty easy print:

• Layer Height: 0.15-0.2mm Quality
• Infill: 10%
• Material: ASA recommended¹ due to UV, heat, and moisture resistance
• Supports: None

Model Files

Note: I make all of my models in Creo, I put all of my models in this GitHub Repo.

1) This post contains affiliate links, any link marked with ¹ is an affiliate link. Using these links helps support my work!