(Limbus Company) Yi Sang Coin

Hello everyone, its been a little bit but I am back from vacation and planning on getting back to work on these models! These series of models were uploaded much earlier on my Cults account as were originally paid models, however, I have decided to make all my models free now. I will set up a Kofi later if you wish to support me. As for the other models, Solemn Lament's internals are still being worked out, and still having issues with Twilight's guard but both should be released in early January. After that, I will be working on Don's E.G.O. Lance/Manager Don's Lance and Lobotomy Corp/Library of Ruina Coins.

FOR PERSONAL NONCOMMERCIAL USE

https://cults3d.com/@MrHShroud
https://x.com/Mr_H_Shroud
https://ko-fi.com/mrshroud

Be sure to leave a comment on what I should make next from Limbus Company! Follow my Twitter for updates and donate to my Kofi if you enjoy my work!

Suggested Print Settings (but feel free to print at whatever settings you want):
Resolution: .1 (Or however high your slicer can go)
.2 infill
60 mm/s

Note: If you are using a FDM printer, I suggest printing this coin vertically, as slicers will be able to code the finer details easier than laying the coin down.

Note: if you have a Resin 3d printer, I recommend using this as it is will be easier to make the small details. And if you want to go above and beyond, you can try electro-plating the coin by using HEN3DRIK's tutorial! This is a link to his video on it: | https://www.youtube.com/watch?v=TlD9USAhcEs | I want to try doing this someday but I don't have access to a Resin 3d printer.