Strong Computer Legs Anti Dust BeQuiet Light Base & Dark Base Pro 901

Heyhooo

Here I have some legs for my PC Case so it is not that close to the floor any longer.

I have the problem that it is quite dusty in here and I wasn't able to clean beneath the PC.

So I designed these legs so the pc is a lot higher in the air and therefore it's less likely to attract that much dust.

The legs are designed to be strong and durable so they won't come off or break at all. Even if you drag around the computer.

Printing:
0,2 mm layer height, 25% Infill, 4 Perimeter, PETG (Or tougher) recommended.

After releasing this feet I was informed that BeQuiet is currently running a Light Base competition!
What a coincidence! So here is also the version for the Light Base housing!

Assembly & Hardware:
Dark Base Pro 901
For assembly you need 4 x M3 20 mm - 30 mm Screws per Leg.

Light Base:
It is necessary to screw the Base Plate to the feet by using 2 x M3 x 10-12 mm Screws. So you need 2 of that screws (Countersunk) + 2 M3 Nuts per foot.

Strength:
I tested my prototype (Only 2 Perimeter, 15% Infill, PLA fast printed) with my weight (around 90kg). It had no problems even while jumping a little on it :D Still recommend to print it a little stronger as mentioned above.

Have fun (and less dust)!