Bernina Krokodil Remix Parts

I have made changes to some of the parts.

Center:
Center side section with BERNIAN-BAHN text no. 82.
Must be scaled down to 10%.

HeadLamp3mmLedHolder:
In the front there are two 10mm holes for front lamps, and fit these in with 3mm white/red LEDs.
I printed it in "silver"

MotorBlockLock:
There are 4mm holes for holding the boogies to chassis.
In this holder there is room for a M4 nut.

Roofcooler:
RoofthingA & roofthingB combined with a bit extra.
Must be scaled down to 10%.
I have printer it up-side-down, and as there are a lot of holes you need a Brim.

RoofHalfForHenhouse:
I have studied old pictures of the engine and on all the pantographs are henhouse type like LGB 63403.
Also they are placed further out in the front.
Please check scale.

Front-82 v6.stl
Front part with no. 82