Here's a tow boom. Comes with a dowel and roller. Now you can tow your friends when they say "Yeah, of course I can take that line!" and then wreck their 24th scale vehicle well beyond a trail repair. You've got them covered. It doesn't come with a napkin for drying tears.
- Meant to be resized to 35mm wide. NOTE: MUST be resized because like a lame ass I didn't scale correctly, so it will be exactly 2x the size it is meant to be, you must now do simple math. I'm sorry.
- The printed wheel is sized for a 6mm by 2.5mm bearing with a 3mm center hole. Simply slide the wheel on the bearing, hold the contraption in place at the tip of the boom, and slide the dowel through the tow boom holes and bearing hole. You'll probably want to glue the dowel.
- I made it specifically for the Meus 6x6 frame rails, just replace the rear tray with this,
- It's also meant for the NSDRC RS40 nano winch. So other's won't fit. Very specific setup, but if you want to try it out, have at it.
- The eyelet is sized for a standard Injora sized pivot ball, which is what I run my winch line through.
Several_Split_4321
