TBS Mojito air brake servo adapter tray and servo horns

Adapter trays to fit other servos in the air brake slot (or ailerons) Also various long servo horns that will work for the air brakes on the mojito. The GDW RS0708's I wanted to use were too small and the servo horns it comes with aren't long enough. I also have some Emax ES08MDII I wanted to be able to use but they are even smaller than the GDW so I made a tray for them too. Given the emax are somewhat small, it might be wise to glue them to the tray and not rely only on the screws that come with the Mojito as they don't reach the small emax servo.

There are 2 servo tray types and 3 servo horn types, GDW, EMAX (SCX24), and SG90.. Wll have to mirror the emax servo tray for the other side.

The servo horns should be printed out of a very strong material like ASA or ABS or PETG at 100 infill and ultradetail .05 or .10mm to maintain the servo horn tooth pattern (.6mm nozzle won't work). Normally I might not want to rely on printed servo horns for a plane but for air brakes its probably ok and they aren't likely to break if printed in the right material.