March 23, 2025
Description
An improved foot control pedal for the Brother Innov-is sewing machines.
(Brother innov-is 10, 10a, 15, 20LE, 27SE, 30, 35, 50, 55, 55FE)
The anti-slip pads are 120 grit sandpaper with double-sided adhesive tape.
Anti-slip rubbers on the underside made of moulded rubber. Glued on with superglue.
The original foot pedal uses a 50k sliding potentiometer. Here a 100k rotary potentiometer is used, but only half of the rotation range is utilised.
All swivel joints are fitted with 8x5x2.5mm ball bearings.
| Amount | Component | Supplier | Price |
|---|---|---|---|
| 3 | preserving rings (anti-slip feet) | supermarket | <1€ |
| Small piece | 120 grit sandpaper (metal, varnish) (anti-slip strips) | Hardware store | <1€ |
| 2 | compression springs | Hardware store (Bauhaus, toom) | €2.40 |
| 5 | ball bearings 5x8x2.5mm | Amazon | 4€ |
| 20cm | shaft steel 5mm for one shaft each with length: 64mm, 35mm, 22mm, 16mm | Hardware store | <1€ |
| 1 | Potentiometer 100k RK09L122-LIN100K | Reichelt.de | 1.85€ |
| 1 | jack cable 3,5mm | e.g. Reichelt.de | 2.65€ |
| 1 | 1k resistor | e.g. Reichelt.de | 0,10 € |
| 1 | 1N4148 diode | e.g. Reichelt.de | 0,10 € |
| 2 | countersunk screw M3x5mm | Hardware store | 0.10€ |
| 6 | countersunk screw M3x10mm | Hardware store | 0.30€ |
You can find the FreeCAD Files here: https://www.sebulli.com/fusspedal2/index.php?lang=en (bottom of page)
License:
Creative Commons - Attribution - Share Alike
sebulli
