Red Lantern Razer request model

I was asked by a follower to make Razer a red lantern from the 2012 green lantern series. hope this works for him!!
I made three different versions. my normal 36 mm scale, a 45 mm scale, and a 75 mm scale. I am no professional when it comes to making that require being split but I cut up the 75mm model to make him easier to print.

36 mm scale stands about 40 mm tall, 47 mm on his base.
36 mm base is roughly a 1 inch base
45 mm scale stands about 50 mm tall, 59 mm on his base.
The 45 mm base is around 1 1/4 inches.
75 mm scale stands about 84 mm tall, 99 mm on his base.
The 75 mm base is about 2 inches.

I tried to make sure there were no errors through mesh mixer. The 75 mm scale head I had to do a little extra clean up but I believe he shouldn't be too bad around the seems of the neck. Please feel free to reach out and let me know if you find any that make him impossible to print.

And as always If you like the models I make and want to help me consider following or donating on my Ko-Fi page!!
https://ko-fi.com/solangavitz