May 20, 2025
Description
A modular, hexagonal, interlocking stand system for Amiibo figures. Includes 10mm, 20mm, 30mm, 40mm, 50mm, and 60mm heights. The Amiibos stand in a recess that is 5mm deep. Great for displaying Amiibos with different heights.
Loosely inspired by Interlocking amiibo stand by nightvision.
Doesn't require supports. Recommended to print without a raft. 0.12 through 0.28 resolution tested with Cura default settings for PLA (0.8mm - 1.2mm wall thickness with 2-3 wall lines). 5% cubic infill should be enough to support the upper section.
License:
Creative Commons - Attribution - Non-Commercial - Share Alike
drivec
