DuPont Wire Organizer - minimalist + small footprint

NOTE: I recommend scaling and printing this model at 105%, it seems like most people prefer a looser fit.

I wanted a way to keep my DuPont wires together and organized but wasn't a big fan of the big clunky comb-style organizers. So I made my own!

This organizer can hold about 20 to 22 wires at a time. The wires I have are about 195mm long (excluding the plastic connectors). Fully packet, the organizer has a foot print of roughly 25mm by 125 mm.

Keep in mind I print with a 0.8mm nozzle @ 0.4mm layer height. So, this model is optimized for that configuration. It should print fine if you use a different nozzle diameter and layer height, but no guarantees!

There is a slight technique to inserting the wires into the organizer. Basically, hold the organizer in one hand, and press the wire against the slot with the thumb on that hand, while using your other hand to kind of “wind” the wire around the curve. I know, I know…trust me it is easier than it sounds and it keeps your wires nice and snug!