SCX24 Shocks

Here are some shocks for the SCX24, are they good? no, do they work? Yes they do. Have fun!

These were just an experiment, so there are some caveats:
-- These should be printed with a .2 nozzle to get the thread detail (this is what I used on an A1 Mini)
-- They are not meant to hold liquid/oil
-- They are fragile

To put them together:
-- Screw the adjuster ring onto the main body housing, set aside
-- Slide the lower barrel (small one) into the upper barrel (the medium sized one)
-- Drop both barrels into the main body housing
-- Screw the shock top cap onto the main body housing
-- slide the spring up onto the main body housing assembly
-- compress the spring and grab the small barrel (be careful not to pull it too hard or it will pop out) and thread on the bottom cap end