Low Friction Universal Filament Spool Holder

Low friction universal filament spool holder.

Requirement's: 4x 608 bearing (22.1mmx7mm)

The pin holes are 8mm so you can also use two M8 rods to connect the two holders to each other.

Two different sizes are available:
24mm and 30mm width.

I also added anti slip pads which you can glue beneath the holders (should be printed with tpu 85a or softer for best results).

For less calibrated printers i added different sizes pins and wheel guides (optional).

Resolution = 0,2
Supports = no
pin = brim