October 26, 2025
Description
Creating my next plane, the russian MiG 41.
My Setup for this jet is: 2 Servos, 12 Blade - 65 mm - EDF Fan. 60 Amp. ESC.
This Jet has cheater holes for better thrust.
Huge 84 cm long - ca. ≈ 930 g. weight with EDF and ESC.
I would be glad if you tip me, because this plane is 100 % free for you and there are a ton of hours of work in it.
It needs a lot time to create it, so stay updated :-) Regards from Germany!
I just printed the model without any infill and with two wall lines — it has good stability.
Just mirror the “links” parts to get the full aircraft. You’ll need a large printer — I printed mine on a Bambu Lab A1 with a 25×25×25 cm build volume.
No maiden flight yet!
Aditional parts needed so far:
4x 1 cm round and 2mm thin neodym magnets
2 x 9g Metal Gear Servo
8 xRudder Hinge
2x 300 mm x1,2mm Servo Rods
4x M2,5x8mm screws for Servo Holder Compartment
electric components i am using:
12 Blade -65 mm - EDF Fan.
60 Amp ESC
DX5e Spektrum Remote Control (Using Mix Mode Elevon / Delta Mixing, left Servo Port->AILE, right Servo Port -> ELEV)
Spektrum AR 600 receiver
License:
Creative Commons - Attribution - Share Alike
matrixxp89
