I've seen a few interpretations of a possible "combined form" of Tommy's zords from MMPR (one of which was made canon in the comics), but no official figure has ever been produced. I wanted to make a figure that faithfully captures the look of the original series/toys. I couldn't decide on my favorite design, so I made several! Your options are:
1. White Tiger Dragonzord - inspired by the Boom Studios comic series.
2. Tiger Dragon Falconzord - inspired by [toymakr3d's Guardian Angel](https://www.toymakr3d.com/product/63-guardian-angel), and artwork by Septyan Mulana.
3. Tiger Dragon Falconzord - inspired by a kitbash of the classic toyline by [Herq Toys](https://www.youtube.com/@herqhobby).
4. Tiger Dragon Battlezord - my own concept, which substitutes Falconzord for the Zeo Red Battlezord.
Also included is an unposed/exploded model, for those who may want to remix or improve upon the model.
As noted earlier, the model is meant to be printed in one piece, then hand-painted. Beware, there are several tight crevices that make painting very difficult! If you have a multicolor printer, more power to ya.
This figure was meant to scale with the 30th Anniversary 7" zords, and is noticeably smaller than the classic zords. See the above photos for reference.
For best results, print the figure standing upright with a brim and tree supports. If printing one of the Falconzord options, beware that its wingspan is roughly 9", so you may need to rotate the model to avoid the tips of its wings being sheared off while printing. I learned that the hard way.
technosuperguy
