MINI ITX Callisto 2 Fallout theme with Windows 10

Check my new Project ! The Scorpio 1 Industrial PC !    https://www.thingiverse.com/thing:7310437

For more Models check my profile https://cults3d.com/en/users/CelestiaChibiPC/3d-models

MINI ITX TERMINAL FALLOUT – CALLISTO 2 (V21)

UPDATE- NEW VERSION FIX SOME ISSUES V26 VERSION
power button easier to install, keyboard fits but still clashes on the sideways, power supply cable fits easier.

I recommend the version named V26_PARTS_callisto_2_montado_3mf

The history photos on thingverse shows the start to end/ follow up of the project

USE A RUBBER HAMMER TO MAKE THE PINS FIT ! DO NOT USE A METAL HAMMER IT CAN DAMAGE THE PARTS PRINTED

i used 60% infill in the 10 support pins that hold the parts, and i always hold the pc with my hand below in the middle since im not sure if the pins wil hold the weight if i hold only in the front. i just dont like to risk it

Dont forget to check the screen size if it will fit with yours, i put a square to reduce the screen area above. you can remove it.

I had some spare parts from an old pc and love fallout franchise so i decided to make a callisto 2 windows pc.

🔧 MAIN HARDWARE
Motherboard
• Jingsha Mini-ITX B75
https://pt.aliexpress.com/item/1005010231697003.html?spm=a2g0o.order_list.order_list_main.208.4f96caa4PECNSI&gatewayAdapt=glo2bra
• LGA1155
• DDR3
• NVMe
CPU
• Intel Core i7-2600
CPU Cooler
• Intel Stock Cooler (LGA1155)
RAM
• 8GB DDR3 (2×4GB Corsair)
Storage
• WD Green SN350 250GB NVMe SSD
Graphics Card
• Radeon R5 230 Low Profile – PCYes (2GB DDR3)
⚠ Original heatsink collided with display support pins.
Heatsink removed and repositioned sideways for clearance.

Power Supply
• Metalfish BD550M – 80 Plus Gold (SFX / Mini-ITX)
https://pt.aliexpress.com/item/1005009609601844.html?spm=a2g0o.order_list.order_list_main.130.4f96caa4PECNSI&gatewayAdapt=glo2bra
⚠ Installed above internal cables to allow case lid to close.

🖥️ DISPLAY – MODEL JRP 7006
• 7” Touchscreen IPS 1024×600
• HDMI input
• 90° HDMI adapter

🖱️ PERIPHERALS
Keyboard
• Redragon Lakshmi 60%
◦ Body width: 29.1 cm
◦ Cable adds: +1.2 cm
◦ Total required space: 30.3 cm (303 mm)
⚠ USB-C side cable presses against case wall and slightly deforms side panel.
Mouse
• Baseus F01B (Bluetooth + 2.4G)
https://pt.aliexpress.com/item/1005005847298347.html?spm=a2g0o.order_list.order_list_main.166.4f96caa4PECNSI&gatewayAdapt=glo2bra
Wi-Fi Adapter
• TP-Link TL-WN725N (USB)

🔊 AUDIO
Speaker Module
https://pt.aliexpress.com/item/1005007251402635.html?spm=a2g0o.order_list.order_list_main.11.4f96caa4PECNSI&gatewayAdapt=glo2bra
USB + HD Audio Panel (used for audio jack)
https://pt.aliexpress.com/item/1005008003543684.html?spm=a2g0o.order_list.order_list_main.319.4f96caa4PECNSI&gatewayAdapt=glo2bra
Motherboard Boot Buzzer
https://pt.aliexpress.com/item/1005004651571219.html?spm=a2g0o.order_list.order_list_main.349.4f96caa4PECNSI&gatewayAdapt=glo2bra

💡 LIGHTING & CONTROLS
12mm Power Button (Blue LED – Ready for Boot)
https://pt.aliexpress.com/item/1005003623296396.html?spm=a2g0o.order_list.order_list_main.40.4f96caa4PECNSI&gatewayAdapt=glo2bra
LED Strip

🔌 INTERNAL COMPONENTS & MODIFICATIONS
Baseus USB Extension
https://pt.aliexpress.com/item/1005006059367761.html?spm=a2g0o.order_list.order_list_main.148.4f96caa4PECNSI&gatewayAdapt=glo2bra
USB 3.0 Extension (disassembled, internal cables used)
https://pt.aliexpress.com/item/1005007407065796.html?spm=a2g0o.order_list.order_list_main.314.4f96caa4PECNSI&gatewayAdapt=glo2bra
80mm Fan
https://pt.aliexpress.com/item/1005009922565415.html?spm=a2g0o.order_list.order_list_main.309.4f96caa4PECNSI&gatewayAdapt=glo2bra
Compression Springs (rear lid retention)
https://pt.aliexpress.com/item/1005009240815002.html?spm=a2g0o.order_list.order_list_main.184.4f96caa4PECNSI&gatewayAdapt=glo2bra

🖨️ STRUCTURE
• Case: Callisto 2
• Printed on: Neptune 4 Plus
• Material: PLA
• Filament: Printalot Cobalt Blue
• Printed in 3 major structural sections

⚠ CRITICAL ASSEMBLY INSTRUCTION
• The motherboard must be placed inside between the two main printed bottom sections BEFORE closing the case.
• There is no insertion angle clearance if attempting to install the motherboard afterward.
• The 2 bottom parts/case must be closed with the motherboard already inside them