Fast printing, multi-hub refill system!
- Compatible with Bambu Lab & equivalent refill spools.
- Two diameters - 175mm and 200mm
- Four hubs for use with internal and external AMSes, arms/hangers, and M8 rod (old skool)
- Print fully featured refill spools better, faster, cheaper.
- Outside diameter 200mm or 175mm, width 67mm, with a hub diameter of 55mm.
- The rims with the SKIRTs are stiffer and
preferable to the plain ones.
NOTES
- Requires six M4x16mm cap-screws and nuts.
- Uses AA batteries for ballast to stop near-empty spools jumping in AMSes.
- The locator superglues into one of the rims (print it in a bright color).
- Do not store in vacuum bag because it will probably deform.
- If using a filament dryer, print spool from a material with a higher temperature rating than the refill.
For a more conventional refill spool, visit: https://www.thingiverse.com/thing:6896875
Check out more printer accessories from
Department_Nine!
Bambu and Bambu Lab are the trademarks or registered trademarks of their respective holders. No relationship exists or is implied between Department 9 or any other company.
Department_Nine
