Shimano MT-200 - Brakesensor attachment

Attention: Use it at your own risk!

Thing is to mount up some halleffect sensors to the shimano MT-200 so you can drive e-motors on your bicycle.

Don't forget to mirror in slicer for right brake lever :)

Easiest way to bend is to heat up the section with a lighter.

You will also need:

• some glue (if printed in ABS/ASA best is acetone)

• ziptie (4 mm wide)

• and this thing to mount up the magnet: https://www.thingiverse.com/thing:4684035