6-Way Marine Switch Panel – 19mm / 22mm Push Button Version

Simple 6-way marine switch panel designed for 19mm or 22mm push-button switches.

The design is inspired by the BAYWATT TSP Series marine switch panels 110x100.
https://www.amazon.fr/Panneau-Interrupteurs-Commutateur-Bi-Couleur-Camping-Car/dp/B0DG8P3DK2?th=1

The switch you can buy here : https://www.baywatt.com/collections/marine-switch

I made this printable version for DIY boat owners who want to build their own custom panel, test layouts, or create a clean switch installation for a boat, RIB, kayak, camper, workshop, or small electrical project.

The model is designed to be printed sideways, standing straight on the long edge.
I added 45° chamfers so most printers can print it without support.

For Marine Purpose - i suggest PETG. It handles moisture better than PLA.
For longer outdoor life, especially with UV, salt spray, and cockpit exposure, I recommend adding a thin epoxy coating, clear varnish, or another protective finish after printing.

I will try to publish more variants if there is download and likes, including versions with USB chargers, voltmeters, 12V sockets, or mixed switch layouts.

Note :

• Print sideways / standing on the long edge
• No support should be needed thanks to the 45° chamfers
• Print slow for better detail
• PETG recommended
• Add epoxy, varnish, or UV protection for better marine durability