(Limbus Company) Meursault Coin

Hello everyone, its been a minute.

TLDR, college and life

Anyways, new coin! I made two version, one where its just a straight trace of his symbol from Limbus, and my interpretation of what a version would look like if his symbol was expanded. Personally, I think the trace looked very incomplete, but it's mostly because Meursault's symbol works best as a pin or a shield logo.

Meursault was thankfully very easy and a good way to get me back into the groove for making stuff again. Expect a new weapon in a few days and the rest of the coins later this month! I plan to finish them all by the end of june in addition the the sephirah coins that I will be releasing aswell so I don't have to make more coins in the future.

Thank you all for the patience, and have a great morning, day, or night.

FOR PERSONAL NONCOMMERCIAL USE

https://cults3d.com/@MrHShroud
https://x.com/Mr_H_Shroud
https://ko-fi.com/mrshroud

Be sure to leave a comment on what I should make next from Limbus Company! Follow my Twitter for updates and donate to my Kofi if you enjoy my work!

3D printing settings
Suggested Print Settings (but feel free to print at whatever settings you want):
I highly suggest using a .2 nozzle instead of the standard .4mm
Resolution: .1 (Or however high your slicer can go)
.2 infill
60 mm/s

Note: If you are using a FDM printer, I suggest printing this coin vertically, as slicers will be able to code the finer details easier than laying the coin down.

Note: if you have a Resin 3d printer, I recommend using this as it is will be easier to make the small details. And if you want to go above and beyond, you can try electro-plating the coin by using HEN3DRIK's tutorial!