DeLonghi Magnifica S Cup Grid / Cup Rest (Unofficial Spare Part)

This is a 3D‑printed replacement cup tray for the De’Longhi Magnifica S espresso machine.
The original metal grate on my machine became scratched and worn over time, so I measured the part and redesigned it from scratch in CAD as a printable alternative.

Dimension: 229,7 x 134,5 x 3,7 mm

Compatibility
Designed for the De’Longhi Magnifica S series (e.g. ECAM22.110). Fit may vary slightly between models; please check dimensions and clearances on your own machine before use.

Printing recommendations
– Material: PETG or other heat‑resistant, food‑safe‑ish filament
– Layer height: 0.2 mm (or finer for nicer edges)
– Infill: 20–40% (grid/gyroid)
– Perimeters: 3–4 walls for a more rigid tray
– Print orientated flat with adequate bed adhesion

Notes / disclaimer
This is an unofficial spare part. It was modeled by myself based on measurements of my own machine and is not manufactured, endorsed or approved by De’Longhi.
De’Longhi and Magnifica S are trademarks of their respective owners and are used here only to describe compatibility