Replicator 2/2X X-Harness Strain Relief

This is a thing-in-progress. Proceed at your own risk.

There is some concern that the Replicator 2/2X wire harness is made of standard ribbon cable that is not rated for continuous motion. Furthermore, its mounting to the Y gentry causes flex where the wire exists the back of the motor mount. Also, the sharp 90º bend at the front has been the subject of discussion as another point of failure.

This thing supports the back of the cable, so that it doesn't sag below the exit point of the cable channel and repeatedly flex at this point. Also, it provides a rounded cable path for the 90º bend and a cable clip.

Feedback is appreciated