Soda Machine - Idaho3D

Build your own soda machine!!
The 3D printed files are for the Label holder and the Nozzle.
I built my own machine based off this YouTube video.
https://www.youtube.com/watch?v=k0ERi0Bt8Gk

The label holders are attached with a screw with some double sided tape on the top so they pivot and press the button. I may post a better version if I get around to it, it needs a built in pivot point to work better.

I'm not going to post more detailed instructions unless someone specifically asks. But if you do have questions feel free to ask.

A PDF is attached for the plywood parts, I do have Autodesk files for the entire assembly, but did not attach them, if you are interested just post a comment.

Have fun!!

3D Printed Parts
Nozzle
Label

Purchased Parts
Arcade buttons
Wire and connectors
1/2" tube
aquarium tubing
battery holders
plexiglass
aluminum angle
1/2" Plywood
paint
four 6V air pumps (I rigged these up to 12 volts and they work fine)
https://www.amazon.com/gp/product/B06Y2CXZ67/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1