Wall System for Zombicide

A wall system to raise the bar on your Zombicide game. Looks great when painted!

NOTE: Photos of painted system include decorations that are not in the system. Photos of painted system by Tlug and @user_1202281875, used with permission. Thank you!

Updated to version 1.4 (14. August 2025):

• Added two new door frames for my new double door model.

Updated to version 1.3 (18. Feb 2025): 

• New T-connector type
• More ruined walls
• Added an alternative door frame, where the top is open for easy removal of adjacent walls (thank you to JeSTeRss)

Print what you need in either 25mm (half-height) or 50mm (full-height).

Walls are 2, 3, 4, 5, 6, 7, 8, 9, 10 cm in length.

There is a “connector only” wall piece for attaching a connector (corner) to a door.

There are 4 connector types: X, T, L and I, that connects 4, 3, 2 and 2 pieces.

DOORS

The wall system fits with my print-in-place doors, that you can find in my Zombicide collection or directly through these links: 

• NEW 7 Doors for Zombicide
• Double door (for the mall etc.)
• Old double door (Fantasy/Green Horde)
• Plain door
• Windowed door (diamond shape)
• Door with bars (reinforced door)
• Wooden door
• Classic door

TEXTURES and FEATURES

• Plain walls
• Brick walls
• Cinder block walls (large bricks)
• Ruined (broken) brick walls, Cinder walls and Plain walls
• Windowed walls (a few)
• Door frames (closed top and open top)
• Added a build plate with a DIY window (put a negative part in the size of your desired window on a wall piece)

TIPS

• You can choose to print the walls flat or standing. Flat is faster, but takes up more build plate per wall.
• If you want half-height textured walls, you can cut them to half height. Cut, don't resize or the textures will look weird.
• Textured walls print best when lying down with the texture side pointing up.
• Door spacers should NOT be resized, since they fit with my print-in-place doors.