red/green switch for lipo or other

**

this  is the fisrts version of this switch, there is a newer one that I strongly recommend you to print.

upgrades on the version 2:

-the moving part size is more acurate and will allow it to stay in place on this model.

-the top part that is glued on the base is now way easierr to put in place and glue. it just slide over the other pieces. put a drop of glue on the sides walls to glue the top part and seal the switch. 

**

this is a smal red and green switch designed to be fitted on lipo battery to tell them appart and know if they are still charged or not.

can be used for other purposes.

the model in the 2nd pictura was printed with my ender 3 max that why i did not use the multicolor.

*Edit* 

you will still need to enlarge the small moving part (102-3%) to get a snug fit.

print the file that is name “switch right size” to have the sliding piece to the right size.