Adjustable Silicone Mold Box- 2 inch walls

This model is for an adjustable mold box wall for making silicone molds.  Moldel is 178mm wide and 2inches tall to fit on the bed of an A1 Mini. I have a print profile prepared with 4 on a plate which I will upload, or you can clone it in the slicer and print as many as you need.  Layer lines MAY affect silicone leakage, I will be putting a piece of postal tape on the walls that will be facing the silicone.  Also I recommend doing a brush on print coat when making your silicone mold, in which you seal any gaps between the mold walls and/or table surface- then wait half an hour or so before you pour the main silicone for your mold.  This is the lazy way I do molds so that I don't have to go around with a hot glue gun and seal the inside of the mold.  If you need further explanation of this process, send me a message.  This model is for light duty silicone mold making as the wall of the mold box is 3mm thick.  I will assemble the 4 parts of the adjustable mold box with binder clips.  If this model is useful to you please don't forget to rate the print and message me with any feedback about edits.  

 

my other arts & crafts models-

https://makerworld.com/collections/22208418

 

Boost MeI need more boosts so I can get free filament!