Vekoma roller coaster model

     A realistic model of a piece of Vekoma roller coaster track. I recommend using basic PLA to print yours, but you can try other filaments if you want. It also takes 2 plates and around 9 hours of printing depending on the printer. To remove the supports for the track I recommend using small pliers and removing at the thick part of the supports and they should come off easily. Enjoy! (and let me know if there's anything wrong with the print)

Building Difficulty: 2/10

Dimensions: (Length - 9.5 inches) x (Width - 2.6 inches) x (Height - 2.7 inches)