Vekoma Vertical Loop roller coaster model

     This is a realistic model of a roller coaster vertical loop designed by Vekoma. It's inspired by Abyssus at Energylandia. I recommend printing it with basic PLA, but you can try other filaments at your own risk. The model is 2 plates and takes about 22 hours to print it in full color. To remove the supports for the track I recommend using small pliers and removing at the thick part of the supports and they should come off easily. I recommend building from bottom to top and the chart I made labels where all of the pieces should go. Super glue is also recommended. Enjoy! (and let me know if there's anything wrong with the print)

Building Difficulty: 6/10

Dimensions: (Length - 14.7 inches) x (Width - 6.8 inches) x (Height - 15.5 inches)