Apex Legends R99 - Cosplay Prop Replica

Finally available on Makerworld!

One of my all-time most downloaded models – the legendary R99 from Apex Legends – is now ready for you to print easier than ever.

Boost MeSupport me by boosting this model. :)

The model is split into several parts to fit on smaller 3D printers with a minimum build volume of 25 x 21 x 21 cm (9.84 x 8.3 x 8.3 in).

All parts are already oriented for optimal printing with minimal supports – just slice and print!

 

Good news: You can complete the entire print in under 24 hours and with less than 1 kg of filament, depending on your slicer settings.

For the assembly, I recommend using two 6 mm rods, each 215 mm long, to connect the parts easily and securely.

 

The assembly instructions are available as a separate download in the file section.

If you have any questions, feel free to reach out!

 

You can also check out a full detailed build video right here: YouTube

Please note: This is a completely static prop – not a working rifle - handle with care!