Milsbo Corner Pots - Angular

I wanted to add some extra verticality to my Ikea Milsbo "greenhouse" cabinet for a couple of trailing plants, and a pair of pitcher plants so designed these simple corner pockets that mount into the existing 4mm holes on the frame anywhere there is a screw hole along the 4 corner verticals of the cabinet. The pots stabilise themselves against the glass panels which helps square the cabinet too - functioning as enlarged corner cleats whilst also boosting the pot holding spaces of the cabinet.

If you need corner mounted pots for an Ikea Fabrikör cabinet, I have some designs here: https://makerworld.com/en/collections/8347549-ikea-greenhouse 

 

Boost MeThank you for supporting my work - a boost and a review are greatly appreciated.

I have mine printed in PETG-HF Black to match my black cabinet, and mounted with a 4mm machine screw - although you can use the ones included in the cabinet's box if you have spares. There are two options available with slightly different mounting heights to suit different positions relative to existing shelves, as well as a pair of scaled versions that are more snug (and more spacious) without over-flexing the panels when screwed in tightly.

 

On an X1C you can print a set of 4 in a single plate - but for compatibility with all models the print file contains one of each variant per plate.

For a collection of my other houseplant & wildlife models you can click here: https://makerworld.com/en/collections/5616753-plants-wildlife